Paving Machine For Making Water Canal Channel

Paving Machine For Making Water Canal Channel:

6 Advantages:

1 Paving Machine For Water Canal Automatic directional control, smooth concrete lines.

2 Machine For Making Water Canal The molds can be replaced endlessly, reducing replacement costs. The machine's width can be adjusted according to different ditch sizes.

3 Paving Machine For Water Canal The moulds can be raised above the work surface, allowing the machine to move autonomously, up and down the access ladders.

4 Machine For Making Water Canal The machine's construction speed can be adjusted continuously at any time.

5 It can also pave concrete road within 5 meters wide.

6 Vibrator-driven concrete shaping, faster speed, higher density and better smoothness.

Compared with wire rope traction type or reverse thrust extrusion machines:

Traditionally, wire rope traction type or reverse thrust extrusion machines, their only advantage is thelow cost.
The disadvantages of these machines are:
1 The mould is part of the machine itself, making it impossible to change moulds.
2 The mould cannot be hydraulically raised or lowered.
3 The machine cannot be automatically moved.
4 The machine cannot adjust its width.
5 The flatness and smoothness of the formed channel are poor.
6 The construction speed is very slow.
7 The machine cannot automatically control direction, requiring frequent changes the anchor point of the pull rope.

U Shaped Water Channel Machine:

Trapezoidal Shaped Water Canal Machine: